Effect of bone loss simulation and periodontal splinting on bone strain Periodontal splints and bone strain

AbstractObjectivesThe influence of bone loss and periodontal splinting on strains in supporting bone is still not well understood. The aim of this study was to analyse the effect of bone loss and periodontal splints on strains in an anterior mandible structure.MethodsTen anterior mandible models were fabricated using polystyrene resin. Eighty human teeth were divided in 10 groups (right first premolar to left premolar) and embedded in simulated periodontal ligament. Strain gauges were attached to the buccal and lingual mandible surfaces. The models were sequentially tested for 7 conditions: no bone alterations and no splinting; 5mm of bone loss between canine teeth; bone loss associated with resin splint between canine teeth; bone loss with wire splint; bone loss with wire/resin splint; bone loss with extracoronal fibre–glass/resin splint; and bone loss with intracoronal fibre–glass/resin splint. Oblique loads (50, 100, and 150N) were applied on the teeth. Data were analysed using 3-way ANOVA and Scheffe's test (α=.05).ResultsStrains on buccal surface were higher than on lingual surface. Bone loss resulted in strain increase at 100 and 150N loading. Dental splinting with resin resulted in strain values similar to the control levels.ConclusionsBone loss increased strain mainly in the buccal region. Dental splints with adhesive system and composite resin produced lower bone strains irrespective of occlusal load

Biomechanical and morphological changes produced by ionizing radiation on bone tissue surrounding dental implant

Objective: This study analyzed the effect of ionizing radiation on bone microarchitecture and biomechanical properties in the bone tissue surrounding a dental implant. Methodology: Twenty rabbits received three dental morse taper junction implants: one in the left tibia and two in the right tibia. The animals were randomized into two groups: the nonirradiated group (control group) and the irradiated group, which received 30 Gy in a single dose 2 weeks after the implant procedure. Four weeks after the implant procedure, the animals were sacrificed, and the implant/bone specimens were used for each experiment. The specimens (n=10) of the right tibia were examined by microcomputed tomography to measure the cortical volume (CtV, mm3), cortical thickness (CtTh, mm) and porosity (CtPo, %). The other specimens (n=10) were examined by dynamic indentation to measure the elastic modulus (E, GPa) and Vickers hardness (VHN, N/mm2) in the bone. The specimens of the left tibia (n=10) were subjected to pull-out tests to calculate the failure load (N), displacement (mm) up to the failure point and interface stiffness (N/mm). In the irradiated group, two measurements were performed: close, at 1 mm surrounding the implant surface, and distant, at 2.5 mm from the external limit of the first measurement. Data were analyzed using one-way ANOVA, Tukey’s test and Student’s t-test (α=0.05). Results: The irradiated bone closer to the implant surface had lower elastic modulus (E), Vickers hardness (VHN), Ct.Th, and Ct.V values and a higher Ct.Po value than the bone distant to the implant (P<0.04). The irradiated bone that was distant from the implant surface had lower E, VHN, and Ct.Th values and a higher Ct.Po value than the nonirradiated bone (P<0.04). The nonirradiated bone had higher failure loads, displacements and stiffness values than the irradiated bone (P<0.02). Conclusion: Ionizing radiation in dental implants resulted in negative effects on the microarchitecture and biomechanical properties of bone tissue, mainly near the surface of the implant

Direct resin composite restoration of endodontically-treated permanent molars in adolescents: bite force and patient-specific finite element analysis

Objective: To evaluate the influence of three levels of dental structure loss on stress distribution and bite load in root canal-treated young molar teeth that were filled with bulk-fill resin composite, using finite element analysis (FEA) to predict clinical failure. Methodology: Three first mandibular molars with extensive caries lesions were selected in teenager patients. The habitual occlusion bite force was measured using gnathodynamometer before and after endodontic/restoration procedures. The recorded bite forces were used as input for patient-specific FEA models, generated from cone-beam computed tomographic (CT) scans of the teeth before and after treatment. Loads were simulated using the contact loading of the antagonist molars selected based on the CT scans and clinical evaluation. Pre and post treatment bite forces (N) in the 3 patients were 30.1/136.6, 34.3/133.4, and 47.9/124.1. Results: Bite force increased 260% (from 36.7±11.6 to 131.9±17.8 N) after endodontic and direct restoration. Before endodontic intervention, the stress concentration was located in coronal tooth structure; after rehabilitation, the stresses were located in root dentin, regardless of the level of tooth structure loss. The bite force used on molar teeth after pulp removal during endodontic treatment resulted in high stress concentrations in weakened tooth areas and at the furcation. Conclusion: Extensive caries negatively affected the bite force. After pulp removal and endodontic treatment, stress and strain concentrations were higher in the weakened dental structure. Root canal treatment associated with direct resin composite restorative procedure could restore the stress-strain conditions in permanent young molar teeth

Engajamento docente no Programa de Robótica na Escola da Prefeitura do Recife

Resumo: Este artigo apresenta o resultado de uma pesquisa que analisou o engajamento docente em projetos envolvendo a robótica educacional. Após a identificação dos projetos, dois questionários foram elaborados tomando como base as dimensões da escala de professores engajados, com adaptações. Os dados foram analisados usando a técnica da Análise de Conteúdo. Como resultados, identificamos cinco categorias de engajamento docente: incentivo cognitivo ao estudante; envolvimento emocional; envolvimento cognitivo; comunicação direta com colegas de trabalho e incentivo ao protagonismo estudantil. Os resultados evidenciaram que o engajamento docente pode ser identificado quando existem colaboração com a aprendizagem, sentimento de satisfação, encantamento e entusiasmo, envolvimento cognitivo, parceria com os colegas e planejamento das atividades focando a atuação significativa do estudante

Periodontal therapy for patients before and after radiotherapy : a review of the literature and topics of interest for clinicians

To review and discuss important topics regarding periodontal treatment pre- and post-radiotherapy for head and neck cancer in human patients; to discuss the references for adequate techniques, the appropriate moment for tooth extractions and periodontal management; and to discuss the prevention of osteoradionecrosis. Thirty-nine studies including original studies, randomized clinical trials (RCTs) and reviews were searched in online databases MEDLINE (PubMed) and the Cochrane library. No year of publication restriction was applied. Language was restricted to English, and the following Medical Subject Heading terms were used: radiotherapy, radiation therapy and periodontal treatment. Studies regarding periodontal treatment and tooth extraction that involved clinical management of irradiated patients were selected. The treatment of periodontal diseases before radiotherapy is mainly required to avoid future dental extraction and to reduce the development of osteoradionecrosis. Periodontal treatment in irradiated patients mostly includes scaling and root planing, extraction of condemned teeth and topical and systemic antimicrobial therapy. Tooth removal should be planned at least 14 days before the first day of radiation treatment. Particular care and mouthwashes should be taken during and after radiation. The management of irradiated patients represents a challenge for health professionals, including dentists. It is important to establish recommendations for clinicians concerning dental and periodontal management in irradiated patients before, during and after treatment

Root coverage with platelet-rich fibrin or connective tissue graft: a split-mouth randomized trial

Abstract: This study aimed to compare the use of connective tissue grafts (CTG) and platelet-rich fibrin (PRF) associated with the tunnel technique (TT) for the treatment of multiple gingival recessions (GR). Fourteen patients with multiple bilateral GR [type 1 recession (RT 1)] in the maxillary incisors, canines, and/or premolars were included. The TT was performed on both sides (split-mouth model); CTG (36 GR) was used on one side, and on the other, PRF (36 GR) was used. Clinical parameters, including recession depth (RD), probing depth, clinical attachment level (CAL), and keratinized gingiva thickness/width (GT/KTW), were obtained at baseline and after 1, 3, 6, and 16 months. Lower RD (0.81 ± 0.68 vs. 1.23 ± 0.71 mm) and CAL (2.54 ± 0.63 vs. 2.73 ± 0.82 mm) were observed for CTG compared to PRF after 16 months. Higher GT was obtained for CTG compared to PRF after 3 (1.81 ± 0.56 vs 1.43 ± 0.47 mm) and 6 months (1.67 ± 0.61 vs. 1.38 ± 0.55 mm, p < 0.05). The recession coverage (RC) was higher for CTG (55.42% ± 37.14) in comparison to PRF (29.53% ± 34.08) after 16 months (p < 0.05). Similarly, CTG presented a more complete coverage of the recession (15; 41.66%) than PRF (9; 24.32%). There were no significant differences between the groups in terms of surgery time, postoperative pain, or healing patterns. Greater esthetic satisfaction was obtained with CTG. It was concluded that CTG combined with TT showed clinical and esthetic results superior to those of PRF in multiple GR treatments